E41-T41 Series - MTH Pumps

E41 • T41 Series Regenerative Turbine Pumps

  • Capacities to 24 GPM

  • Heads to 600 Feet

  • Low NPSH Requirements

MTH E41 • T41 Series

Close-coupled and pedestal mounted regenerative turbine pumps represent the most economical, high performance alternative for low flow (1/2 to 22 GPM) clean fluid applications involving moderate to high pressures (heads to 600 feet).
By combining the latest concepts in hydraulic turbine pump design with precision computer controlled manufacturing, the E41/T41 Series pumps deliver high efficiency operation even at low NPSH. Costs are controlled by efficient manufacturing processes and highly optimized pump designs. Maintenance costs are kept to a minimum by combining an easily serviceable design with the use of high quality components to provide long life.

Water Passage Design

MTH masters one of the most critical design considerations for regenerative turbine pumps -- the shaping of water passageways to achieve highest capacity and pressure while minimizing horsepower requirements. By optimizing water passageway cross-sectional profiles for each impeller, MTH has improved both efficiency and pressure in the E41/T41 Series, exceeding the levels realized by previous techniques.

Impeller Profile

One of the most notable improvements in regenerative turbine pump technology incorporated in E41/T41 Series pumps involves the ability to determine the optimum impeller width and blade length. These factors have a significant effect on the required horsepower versus pressure curve for regenerative turbine pumps. By optimizing these for each E41/T41 Series pump, peak efficiency is improved and “off peak” horsepower requirements are reduced as well.

Impeller Blades

After the most favorable impeller profile has been determined for a particular water passageway cross-section, MTH calculates the number of blades needed to maximize the performance of that pump. Current blade design in E41/T41 Series pumps increases both efficiency and design pressure without the manufacturing difficulties associated with producing contoured blade impellers. State-of-the-art computer controlled machines simplify manufacturing of the various MTH impellers utilized in the E41/T41 Series. The result is a high performance pump providing efficiency characteristics exceeding those of more expensive units.

NPSH Requirements

E41/T41 Series regenerative turbine pumps meet low net positive suction head (NPSH) requirements without efficiency loss. This is achieved by keeping the inlet fluid velocity low and then gently accelerating to passageway velocities. Special ramps are responsible for an almost shockless fluid entry into the impeller blades and account for the high inlet efficiency in the E41/T41 Series pumps.

E41 Series

Similar to the T31 Series, the E41 takes advantage of our custom manufactured dual face D3 motors that incorporate a 304 stainless steel shaft and heavy-duty bearing. The stainless steel shaft eliminates the necessity of a shaft sleeve, thereby reducing the parts count and simplifying maintenance and servicing procedures. All D3 motors also feature a two-pole 50//60Hz rating, as well as CE Mark approval useful for OEM’s with worldwide customers. The three-phase versions of the D3 motors feature a compact TEFC enclosure and a range from 1/3 to 3HP. The single phase D3 motors have an ODP enclosure and a range from 1/3 to 2HP. The E41 is available in horizontal close-coupled and vertical flange mounted configurations only. Please see Design Features for more detailed information on both E41 and T41 motor options.

E41 • T41 pedestal Mount Engineering Specs

For a copy of the E41•T41 Manual and E41•T41 Parts List, go to the Product Support Page.

Download a printable version of the E41 • T41 Product Bulletin in .pdf format.

Download a printable Spanish version of the E41 • T41 Product Bulletin in .pdf format.

Download a printable version of the E41 • T41 Catalog Pages (curves and dimensions) in .pdf format.

Download a printable, metric version of the E41 • T41 Catalog Pages (curves and dimensions) in .pdf format.

If you do not have the Adobe Acrobat Reader, click here Click here to go to Adobe and download Acrobat to download the most recent version from Adobe.

MTHPumps.com Home, Find a Pump Type, Find Your Application, Standard Products, How to Buy Our Pumps,
Custom Engineered Products, Product Support, Who is MTH Pumps, How to Contact us , Sitemap

630-552-4115 • Fax:630-552-3688 • Business Hours: M~F 8AM to 5PM Central Time